No products
Prices are tax included
- NEW
-
Kit license plate
142,60€Adjustable inclination license plate holder from 30° upwards with 4-points-locking.
Supplied with LED license plate light (E11), hardware fasteners, and assembly instructions.
It allows...
-
Windshield "Owl's Head" 4 position deflector
212,80€Special windshield made of powder-coated 5754 aluminum that offers the possibility to adjust the deflector in four different positions with automatic snap locking.
A vehicle-specific product supplied with...
-
Special Engine guards CB1000R
286,40€These engine guards are supplied with reinforcement plates having four fixing points in order to offer a better absorption of forces in the event of a violent impact.
Complete with instructions, hardware fasteners, and...
-
Kit license plate
159,80€Adjustable inclination license plate holder from 30° upwards with 4-points-locking.
It allows the mounting of the original indicators and license plate light while mounting on the motorcycle...
-
Windscreen WARRIOR
174,33€Made of aluminum 5754, the windscreen is supplied with all the hardware fasteners needed for the mounting and the assembly instructions. It applies without making any modifications to the motorbike.
The small size...
-
Best sellers
-
In StockKit License Plate Kit License Plate RACE - art. R-0917
Kit with adjustable inclination from 30° upwards.Product fixed to the frame by elastic supports.Complete with LED plate light E11 approved, assembly instructions, and hardware fasteners, the kit... Kit with adjustable inclination from...
Online only -
In StockWindshield Gullwing Windshield Gullwing RACE - art. R-0790B
Made of aluminium, the product is supplied with assembly instructions, supports and hardware fasteners. It applies without making any modifications to the motorbike. The small size does not... Made of aluminium, the product is...
Online only -
In StockRefracting support Refracting support RACE - art. R-0649
By using this support you can apply the original reflector. It is easily applied on the bottom screws of the license plate. Available also with reflector. By using this support you can apply...
Find out on which models it can be applied
9,95€ tax included- Honda
- HORNET 600 03-04
- HORNET 600 05-06
- HORNET 600 2007-2010
- HORNET 900
- CB1000R 2009-2016
- CBR 600RR 03-04
- CBR 600RR 05-06
- CBR 600RR 2007-10
- CBR 900 02-04
- CBR 1000RR 04-05
- CBR 1000RR 06-07
- CBR 1000RR 08-12
- SH 300 07-09
- HORNET 600 2011-14
- CBR600F 2011
- NC700X 2012-13
- NC700S 2012-13
- NC700 INTEGRA 2012-13
- NC750 INTEGRA 2014-19
- CB650F 2017
- CBR650R 2017-18
- XADV 2017-20
- CRF1000 AFRICA TW. 2016-19
- Yamaha
- FZ6 600 04-07
- FZ1 06-09
- T-MAX 2008-2011
- XJ6 09
- R1 2009-2012
- T-MAX 2002-07
- FZ8 2010-15
- T-MAX 530 2012
- MT09-FZ09 2014-16
- MT10 2015-20
- XSR 900 2015-20
- XSR 700 2015-20
- MT09-FZ09 2017-20
- MT07 TRACER 2017-19
- T-MAX 2017-19
- GSR 600 2006-2010
- Kawasaki
- Z1000 2010-12
- Ducati
- STREETFIGHTER 2009-2010
- MONSTER 696-1100
- PANIGALE V2 2014-18
- Universal
- Plate lights and frames
- CRUISER
- VT750S 2010
- CMX500 REBEL 2017-20
- CB500F 2016-18
- MT07-FZ07 2018-20
- CB1000R 2018-20
- MT09 TRACER 2018-20
- PANIGALE V4 2018-20
- CB650R 2019-20
- CBR650R 2019-20
- CBR500R 2016-20
- CB500F 2019-20
- CB500X 2019-20
- NC750S 2014-19
- NC750X 2014-19
- CRF1100L AFRICA TWIN 2020
- T-MAX 560 2020
- PANIGALE V2 2020
- Streetfighter V4 2020
- CB650R 2021
Online only -
![Kit riposizionamento targa "EXENTIAL"](https://www.deprettomoto.com/4814-large_default/kit-license-plate-exential.jpg "Kit riposizionamento targa "EXENTIAL"")
In StockKit license plate "EXENTIAL" Kit license plate "EXENTIAL" RACE - art. R-0901
Adjustable inclination from 30° upwards, with 4 locking points. Includes all components needed for the mounting and the assembly instructions. Allows the use of the original indicators and license... Adjustable inclination from 30°...
-
In StockWindshield WARRIOR Windshield WARRIOR RACE - art. R-0865
Made of aluminium, the product is supplied with assembly instructions, supports and hardware fasteners. It applies without making any modifications to the motorbike. The small size does not... Made of aluminium, the product is...
-
![Kit riposizionamento targa "EXENTIAL"](https://www.deprettomoto.com/5852-large_default/kit-license-plate-cb1000r.jpg "Kit riposizionamento targa "EXENTIAL"")
In StockKit license plate CB1000R Kit license plate CB1000R RACE - art. R-0903
The kit repositions the motorcycle license plate in the standard position, with the inclination variable from 30° upwards with fixing in four points. Fixed on elastic supports it is equipped with a... The kit repositions the motorcycle...
-
In StockKit passenger footpegs repositioning Kit passenger footpegs repositioning RACE - art. R-0733
This kit allows to move the position of the passenger pegs. 46 mm Down, 33 mm backwards and 28 mm outwards. Supplied with hardware fasteners and assembly instructions. This kit allows to move the position...
Online only -
In StockKit controls repositioning Kit controls repositioning CRUISER - art. S-0796
A vehicle-specific product that allows to raise 30 mm (apx. 1.18 in) and to advance 170 mm (apx. 6.69 in) the commands from the original position. Furthermore, this product made of steel allows the... A vehicle-specific product that...
Online only -
In StockKit passenger footpegs repositioning Kit passenger footpegs repositioning RACE - art. R-0761B
This kit allows to move the position of the passenger pegs. 46 mm Down, 33 mm backwards and 28 mm outwards. Supplied with hardware fasteners and assembly instructions. This kit allows to move the position...
Online only -
In StockKit engine guards Kit engine guards RACE - art. R-0822B
These engine guards with two fixing points guarantee a high absorption of forces in case of impact.A specific kit, complete with assembly instructions, supports, and hardware fasteners. It applies... These engine guards with two fixing...
Online only -
In StockSliders WARRIOR Sliders WARRIOR RACE - art. R-0821
These frame protection pads have 2 breaking-points to absorb violent shocks. A specific product, supplied with hardware fasteners and assembly instructions. It applies without making any... These frame protection pads have 2...
Online only -
In StockWindshield WARRIOR Windshield WARRIOR RACE - art. R-0670
Made of aluminium, the product is supplied with assembly instructions, supports and hardware fasteners. It applies without making any modifications to the motorbike. The small size does not... Made of aluminium, the product is...
Online only -
In StockRear hugger Rear hugger RACE - art. R-0898
Product supplied with hardware fasteners and assembly instructions. It applies without making any modifications to the motorbike. Product supplied with hardware...
-
Out of stockGrip inserts Grip inserts RACE - art. AU174/1
The rubber inserts use a special cianoacrylic glues to apply in the designed milled channels of the grips. The rubber inserts use a special...
Online only -
In StockKit license plate Kit license plate CRUISER - art.
The kit includes the homologated E11-LED tail light with three lights: Position, Stop and License plate light. Fixed inclination at 30 degrees. Supplied with hardware fasteners, it applies without... The kit includes the homologated...
Online only -
In StockSpecial Engine guards CB1000R Special Engine guards CB1000R RACE - art. R-0908
These engine guards are supplied with reinforcement plates having four fixing points in order to offer a better absorption of forces in the event of a violent impact. Complete with instructions,... These engine guards are supplied with...
Online only -
In StockKit license plate CRF1000L 2018-19 Standard and Adventure S. Kit license plate CRF1000L 2018-19... RACE - art. R-0858/1
A vehicle-specific product, having variable inclination from 30° upwards with 4-point locking. Supplied with E11 homologated LED license plate light, hardware fasteners and assembly instructions.... A vehicle-specific product, having...
Online only -
In StockSupport reflector 0° Support reflector 0° RACE - art. R-0667
This support maintains the reflector perpendicular to the ground, even with the license plate inclined at 30° as required by the law. Applied to the lower screws of the plate holder, it allows... This support maintains the reflector...
Find out on which models it can be applied
12,95€ tax included- Honda
- HORNET 600 03-04
- HORNET 600 05-06
- HORNET 600 2007-2010
- HORNET 900
- CB1000R 2009-2016
- CBR 600RR 03-04
- CBR 600RR 05-06
- CBR 600RR 2007-10
- CBR 900 02-04
- CBR 1000RR 04-05
- CBR 1000RR 06-07
- CBR 1000RR 08-12
- SH 300 07-09
- HORNET 600 2011-14
- CBR600F 2011
- NC700X 2012-13
- NC700S 2012-13
- NC700 INTEGRA 2012-13
- NC750 INTEGRA 2014-19
- CB650F 2017
- CBR650R 2017-18
- XADV 2017-20
- CRF1000 AFRICA TW. 2016-19
- Yamaha
- FZ6 600 04-07
- FZ1 06-09
- T-MAX 2008-2011
- XJ6 09
- R1 2009-2012
- T-MAX 2002-07
- FZ8 2010-15
- T-MAX 530 2012
- MT09-FZ09 2014-16
- MT10 2015-20
- XSR 900 2015-20
- XSR 700 2015-20
- MT09-FZ09 2017-20
- MT07 TRACER 2017-19
- T-MAX 2017-19
- GSR 600 2006-2010
- Kawasaki
- Z1000 2010-12
- Ducati
- STREETFIGHTER 2009-2010
- MONSTER 696-1100
- PANIGALE V2 2014-18
- Universal
- Plate lights and frames
- CMX500 REBEL 2017-20
- CB500F 2016-18
- MT07-FZ07 2018-20
- CB1000R 2018-20
- MT09 TRACER 2018-20
- PANIGALE V4 2018-20
- CB650R 2019-20
- CBR650R 2019-20
- CBR500R 2016-20
- CB500F 2019-20
- CB500X 2019-20
- NC750S 2014-19
- NC750X 2014-19
- CRF1100L AFRICA TWIN 2020
- T-MAX 560 2020
- PANIGALE V2 2020
- Streetfighter V4 2020
- CB650R 2021
Online only -
In StockWindscreen WARRIOR Windscreen WARRIOR RACE - art. R-0916
Made of aluminum 5754, the windscreen is supplied with all the hardware fasteners needed for the mounting and the assembly instructions. It applies without making any modifications to the... Made of aluminum 5754, the windscreen...
Online only -
In StockKit controls repositioning Kit controls repositioning CRUISER - art. S-0709
This kit offers the possibility to move forward by 115 mm the controls with respect to the origianl position. It applies without making any modifications to the motorbike. Hardware fasteners and... This kit offers the possibility to...
Online only -
In StockKit License Plate MT09 2017 Kit License Plate MT09 2017 RACE - art. R-0785
This kit offers the possibility to reposition the plate. Fastened on elastic supports, the kit includes: chain regulator in aluminium machined from solid, LED License Plate Light E11 approved and... This kit offers the possibility to...
Online only -
In StockMirror screw-thread cover Mirror screw-thread cover RACE - art. X-040
Indispensable to cover the anti-aesthetic screw-thread holes which remain in the case of the removal of the original mirrors. Indispensable to cover the...
Online only -
In StockKit license plate Kit license plate RACE - art. R-0771
Adjustable inclination license plate holder with 4-points-locking. The kit offers the possibility of reusing the original or after-market indicators. Supplied with hardware fasteners and assembly... Adjustable inclination license plate...
Online only -
In StockWindscreen WARRIOR Windscreen WARRIOR RACE - art. R-0905
Made of aluminum 5754, the windscreen is supplied with all the hardware fasteners needed for the mounting and the assembly instructions. It applies without making any modifications to the... Made of aluminum 5754, the windscreen...
Online only -
In StockEngine guards Engine guards RACE - art. R-0734
These engine guards ensure a better absorption of forces in the case of impacts. The kit is supplied with hardware fasteners and the assembly instructions. It applies without making any... These engine guards ensure a better...
Online only -
In StockSliders WARRIOR Sliders WARRIOR RACE - art. R-0902
These frame protection pads have 2 breaking-points to absorb violent shocks. A specific product, supplied with hardware fasteners and assembly instructions. It applies without making any... These frame protection pads have 2...
Online only -
In StockKit footrests Kit footrests RACE - art. R-0824
These laser-cut footrests are made of 316L stainless steel and resist to the most adverse atmospheric conditions. Supplied with hardware fasteners and assembly instructions, the kit applies without... These laser-cut footrests are made of...
Online only -
In StockWindshield EXENTIAL Windshield EXENTIAL RACE - art. R-0911
Offers better aerodynamic penetration and does not interfere with the height settings of the original windscreen.A specific product, supplied with assembly instructions. It applies without making... Offers better aerodynamic penetration...
-
In StockHandlebar ends DarkLight Handlebar ends DarkLight RACE - art. R-0784
Specific product, complete with dedicated adapters and mounting instructions. Applies without making any modifications to the motorbike. Specific product, complete with...
Online only -
In StockPlate LED light Plate LED light RACE - art. AU701
Beautiful and cheap plastic led light for the license plate (Made in China). Beautiful and cheap plastic led light...
Online only -
In StockKit mirrors REVENGE SS Kit mirrors REVENGE SS RACE - art. R-0910
A specific product, complete with hardware fasteners and assembly instructions.It applies without making any changes to the motorbike. A specific product, complete with...
Online only -
In StockSliders replacements WARRIOR Sliders replacements WARRIOR RACE - art. R-0349/2
Nylon specific protection replacement for the sliders "WARRIOR". Nylon specific protection replacement...
Online only -
In StockWindshield WARRIOR Windshield WARRIOR RACE - art. R-0738B
Made of aluminium, the product is supplied with assembly instructions, supports and hardware fasteners. It applies without making any modifications to the motorbike. The small size does not... Made of aluminium, the product is...
Online only -
In StockWindshield WARRIOR Windshield WARRIOR RACE - art. R-0690B
Made of aluminium, the product is supplied with assembly instructions, supports and hardware fasteners. It applies without making any modifications to the motorbike. The small size does not... Made of aluminium, the product is...
Online only -
In StockRear hugger Rear hugger RACE - art. R-0653
A specific product, supplied with hardware fasteners and assembly instructions. It applies without making any modifications to the motorbike. A specific product, supplied with...
Online only -
In StockHandlebar riser kit Handlebar riser kit RACE - art. R-0912
A specific product, complete with assembly instructions and hardware fasteners. It applies without making any changes to the motorbike. It offers the possibility to raise the original handlebar of... A specific product, complete with...
-
In StockWindscreen EXENTIAL Windscreen EXENTIAL CRUISER - art. S-0799
A vehicle-specific product made of aluminium 5754 and supplied with supports, hardware fasteners and assembly instructions. It applies without making any modifications to the motorbike.Maximum... A vehicle-specific product made of...
Online only -
In StockSliders WARRIOR Sliders WARRIOR RACE - art. R-0737
These frame protection pads have 1 breaking-point which absorb violent shocks. A specific product, supplied with hardware fasteners and assembly instructions. It applies without making any... These frame protection pads have 1...
Online only -
In StockRear wheel nut cover Rear wheel nut cover RACE - art. R-0652
A specific product, it applies without making any modifications to the motorbike. A specific product, it applies...
Online only -
In StockWindshield EXENTIAL Windshield EXENTIAL RACE - art. R-0825B
Made of aluminum 5754, the windscreen is supplied with all the hardware fasteners needed for the mounting and the assembly instructions. It applies without making any modifications to the... Made of aluminum 5754, the windscreen...
-
In StockWindshield WARRIOR Windshield WARRIOR RACE - art. R-0660
Made of aluminium, the product is supplied with assembly instructions, supports and hardware fasteners. It applies without making any modifications to the motorbike. The small size does not... Made of aluminium, the product is...
Online only -
In StockNut cover Nut cover CRUISER - art. AU285/2
These covers, machined from solid aluminum, cover the anti-aesthetic hexagonal nuts and bolts. Attention! to measures. These covers, machined from solid...
Online only -
In StockRear hugger Scrambler Rear hugger Scrambler RACE - art. D-0207
ATTENTION! The product is compatible on all SCRAMBLER 800 versions except the DESERT SLEED.Kit made of aluminium 5754, complete with special elastic fixing brackets. Supplied with hardware... ATTENTION! The product is compatible...
Online only -
In StockWindshield EXENTIAL Windshield EXENTIAL RACE - art. R-0840
Made of aluminum 5754, the windscreen is supplied with all the hardware fasteners needed for the mounting and the assembly instructions. It applies without making any modification to the motorbike... Made of aluminum 5754, the windscreen...
Online only -
In StockKit mirrors REVENGE CL Kit mirrors REVENGE CL RACE - art. R-0838
The kit includes: left and right mirrors, covers to close the holes left by the original mirrors, all the hardware fasteners, and the assembly instructions. The kit includes: left and right...
Online only -
In StockKit additional footrests Kit additional footrests RACE - art. R-0827
Kit made of steel and aluminium, machined from solid. It offers excellent grip and the ability to vary the positioning. The product is supplied with all components needed for the mounting, hardware... Kit made of steel and aluminium,...
Online only -
In StockWindscreen WARRIOR (only 2017-18) Windscreen WARRIOR (only 2017-18) RACE - art. R-0820
Made of aluminum 5754, the windscreen is supplied with all the hardware fasteners needed for the mounting and the assembly instructions. It applies without making any modifications to the... Made of aluminum 5754, the windscreen...
Online only -
In StockKit license plate Kit license plate RACE - art. R-0866
Adjustable inclination license plate holder with 4-points-locking. Supplied with LED license plate light, hardware fasteners, and assembly instructions. It applies without making any modifications... Adjustable inclination license plate...
Online only -
In StockKit license plate Kit license plate RACE - art. R-0931
Adjustable inclination license plate holder from 30° upwards with 4-points-locking.It allows the mounting of the original indicators and license plate light while mounting on the motorcycle frame... Adjustable inclination license plate...
Online only -
In StockMirror screw-thread cover Mirror screw-thread cover RACE - art. X-046B
Indispensable to cover the anti-aesthetic screw-thread holes which remain in the case of the removal of the original mirrors. Indispensable to cover the...
Online only -
In StockWindshield "WARRIOR" Windshield "WARRIOR" RACE - art. R-0919
Made of aluminium, the product is supplied with assembly instructions, supports and hardware fasteners. It applies without making any modifications to the motorbike. The small size does not... Made of aluminium, the product is...
-
In StockUniversal indicators support Universal indicators support RACE - art. R-0195
Supports for rear indicators, easily applicable on the screws that?fix the plate. Supports for rear indicators, easily...
Online only -
In StockKit license plate (2014-18) Kit license plate (2014-18) RACE - art. R-0830
The kit allows to adjust the license plate inclination and is supplied with the LED plate light, all the hardware fasteners needed for the mounting, and the assembly instructions. The kit applies... The kit allows to adjust the license...
Online only -
In StockKit passenger footrests supports Kit passenger footrests supports RACE - art. R-0733
This kit allows you to move the position of the passenger pegs. 46 mm Down, 33 mm backwards and 28 mm outwards. Supplied with hardware fasteners and assembly instructions, it applies without making... This kit allows you to move the...
Online only -
In StockUniversal indicators supports Universal indicators supports RACE - art. AU229
Supports for rear indicators, easily applicable on the screws that?fix the plate. Supports for rear indicators, easily...
Online only -
In StockKit additional footrests Kit additional footrests RACE - art. R-0909
Top of the range, with five different adjustable positions. Dedicated to true sports users and designed specifically for use in harsh conditions and off-road. Machined from solid aluminum and... Top of the range, with five different...
Online only -
In StockSliders "WARRIOR" Sliders "WARRIOR" RACE - art. R-0857
These frame protection pads have 2 breaking-point which absorb violent shocks. A specific product, supplied with hardware fasteners and assembly instructions. It applies without making any... These frame protection pads have 2...
-
In StockSissybar Sissybar CRUISER - art. S-0795
Specific product realized in chromium plateed steel, is applied to the motorcycle without any modification. Specific product realized in chromium...
Online only -
In StockKit license plate CRF1000 2016-17 Kit license plate CRF1000 2016-17 RACE - art. R-0858
Adjustable inclination license plate holder from 30° upwards with 4-points-locking. Supplied with LED license plate light (E11), hardware fasteners, and assembly instructions. Applies without... Adjustable inclination license plate...
Online only -
In StockKit license plate 2018-20 Kit license plate 2018-20 RACE - art. R-0915
Kit with adjustable inclination from 30° upwards with 4-point fixing.Supplied with homologated E11 LED-light, assembly instructions and all that is required for the application without... Kit with adjustable inclination from...
Online only -
In StockKit license plate Kit license plate RACE - art. R-0920
Adjustable inclination license plate holder with 4-points-locking. The kit offers the possibility of reusing the new original indicators. (indicative photo)Supplied with hardware fasteners and... Adjustable inclination license plate...
-
In StockUniversal valve cover Universal valve cover CRUISER - art. AU260
Machined from solid aluminum, offers a touch of elegance to the wheels valves. Machined from solid aluminum, offers...
Find out on which models it can be applied
16,40€ tax included- CRUISER
- Honda
- VT 750 SPIRIT 06-09
- VT 750 C4-C5
- VT 750 C2 Shadow
- VT 600 Shadow
- VT750 BLACK SPIRIT 2010
- VTX1300 2010
- VT750S 2010
- Yamaha
- XVS 1300 MIDNIGHT STAR
- WILD STAR 1600
- XVS 1100 CLASSIC
- XVS 1100 SPORT
- XVS 650 CLASSIC
- XVS 650 SPORT
- XV 750/1000/1100 Virago 1986 >
- XVS 950 MIDNIGHT STAR 09-10
- Suzuki
- VS 1400 INTRUDER
- VL 800 VOLUSIA 02-04
- VZ 800 MARAUDER 97-02
- VS 600-750-800 INTRUDER
- INTRUDER C800 05-09
- INTRUDER M800 05-09
- INTRUDER LC 1500
- INTRUDER C800 2010
- Kawasaki
- VN 800 SPORT
- VN800 CLASSIC
- VN 900 CLASSIC-CUSTOM
- Universal
- COVERS
Online only -
In StockWindshield EXENTIAL Windshield EXENTIAL RACE - art. R-0855
A vehicle-specific product, made of aluminium 5754. It applies without making any modification to the motorbike. Assembly instructions included. Maximum dimensions: H = 286 mm (apx. 11.26 in) L =... A vehicle-specific product, made of...
Online only -
In StockRear indicators supports Rear indicators supports CRUISER - art. AU229/1
These supports allow to mount any after market indicators. They apply on both sides using the license plate holder screws. These supports allow to mount any...
Online only -
In StockPlate frame STRETCH Plate frame STRETCH RACE - art. B-0125
A great design and the machining from solid gives worth to this beautiful license plate frame equipped with a reflector. License plate dimensions: 177x177 mm. Holes inter-axis: 157x157 mm. A great design and the machining from...
Find out on which models it can be applied
75,90€ tax included- Honda
- HORNET 600 99-02
- HORNET 600 03-04
- HORNET 600 05-06
- HORNET 600 2007-2010
- HORNET 900
- CB1000R 2009-2016
- CBR 600F 99-01
- CBR 600RR 03-04
- CBR 600RR 05-06
- CBR 600RR 2007-10
- FMX 650
- CBR 900 02-04
- CBR 1000RR 04-05
- CBR 1000RR 06-07
- CBR 1000RR 08-12
- CBR 900 00-01
- SH 300 07-09
- HORNET 600 2011-14
- CBR600F 2011
- NC700X 2012-13
- NC700S 2012-13
- NC700 INTEGRA 2012-13
- NC750 INTEGRA 2014-19
- CB650F 2017
- CBR650R 2017-18
- XADV 2017-20
- CRF1000 AFRICA TW. 2016-19
- Yamaha
- FZ6 600 04-07
- FZ1 04-05
- FZ1 06-09
- T-MAX 2008-2011
- XJ6 09
- T-MAX 2002-07
- FZ8 2010-15
- T-MAX 530 2012
- MT07-FZ07 2014-2017
- MT09-FZ09 2014-16
- MT10 2015-20
- XSR 900 2015-20
- XSR 700 2015-20
- MT09-FZ09 2017-20
- MT07 TRACER 2017-19
- T-MAX 2017-19
- Suzuki
- GSR 600 2006-2010
- Triumph
- SPEED TRIPLE 00-01
- SPEED TRIPLE 02-04
- SPEED TRIPLE 05-07
- SPEED TRIPLE 2008-2010
- STREET TRIPLE 2008-2012
- Kawasaki
- Z750 04-06
- Z750 2007-14
- Z1000 03-06
- Z1000 2007-2009
- ZX6R 2007-2008
- ZXR10 04-05
- Z1000 2010-12
- Ducati
- STREETFIGHTER 2009-2010
- MONSTER 696-1100
- Scrambler 400 2016 >
- Scrambler 800 2015 >
- PANIGALE V2 2014-18
- Universal
- Plate lights and frames
- CRUISER
- Honda
- VT750 BLACK SPIRIT 2010
- CMX500 REBEL 2017-20
- Yamaha
- XV 950R 2014-17
- XVS 1300 Custom 2014 >
- XL883 Custom 1200 LOW 2006-09
- XL883 STANDARD -L -R -N 2006-09
- CB500F 2016-18
- MT07-FZ07 2018-20
- CB1000R 2018-20
- MT09 TRACER 2018-20
- PANIGALE V4 2018-20
- CB650R 2019-20
- CBR650R 2019-20
- CBR500R 2016-20
- CB500F 2019-20
- CB500X 2019-20
- NC750S 2014-19
- NC750X 2014-19
- CRF1100L AFRICA TWIN 2020
- T-MAX 560 2020
- PANIGALE V2 2020
- Streetfighter V4 2020
- CB650R 2021
Online only -
In StockChain adjustment key Chain adjustment key RACE - art. R-0657
Required to restore the chain tension. Required to restore the chain tension.
Online only -
In StockLevers RACE Levers RACE RACE - art. R-0904
A specific product, supplied with assembly instructions. It applies without making any modifications to the motorbike. The kit is designed to reuse the register and the stub of the original brake... A specific product, supplied with...
Online only -
In StockPulley cover Pulley cover RACE - art. R-0833
A specific product, supplied with hardware fasteners and assembly instructions. It applies over the original pulley without making any modifications. A specific product, supplied with...
Online only -
In StockWindshield WARRIOR Windshield WARRIOR RACE - art. R-0760B
Made of aluminium, the product is supplied with assembly instructions, supports and hardware fasteners. It applies without making any modifications to the motorbike. The small size does not... Made of aluminium, the product is...
Online only -
In StockWindshield RunBack Windshield RunBack RACE - art. R-0775B
Made of aluminium, it recalls the classic retro lines. The product is supplied with assembly instructions, supports and hardware fasteners. It applies without making any modifications to the... Made of aluminium, it recalls the...
Online only
Top sellers
-
-
Windshield Gullwing
Made of aluminium, the product is supplied with assembly instructions,...
174,33€ -
Refracting support
By using this support you can apply the original reflector. It is easily...
9,95€ -
Kit license plate "EXENTIAL"
Adjustable inclination from 30° upwards, with 4 locking points. Includes...
198,60€ -
Windshield WARRIOR
Made of aluminium, the product is supplied with assembly instructions,...
174,33€ -
Kit license plate CB1000R
The kit repositions the motorcycle license plate in the standard...
198,60€ -
Kit passenger footpegs repositioning
This kit allows to move the position of the passenger pegs. 46 mm Down,...
97,50€ -
Kit controls repositioning
A vehicle-specific product that allows to raise 30 mm (apx. 1.18 in) and...
438,60€ -
Kit passenger footpegs repositioning
This kit allows to move the position of the passenger pegs. 46 mm Down,...
89,50€ -
Manufacturers
Specials
Suppliers
No supplier